Stops Rust Gloss Rust Protective Enamel Spray, 12 Oz, Lobster Red

Rust-Oleum Stops Rust Gloss Protective Enamel Spray is the No. 1 rust-preventive paint available. Apply to metal, wood, concrete or masonry. Rust-Oleum Stops Rust Enamel Sprays are designed to provide a durable protective coating with excellent rust prevention, and excellent resistance to abrasion, fading, chipping, and dulling. These sprays apply easily, provide excellent coverage and dry fast to a tough attractive finish. Rust-Oleum Stops Rust Enamel Sprays are ideal for ferrous, non-ferrous metal and wood surfaces. It features a comfort tip with a wider finger pad to reduce fatigue caused by continuous spraying and an any-angle tip which allows you to spray at any angle. Not for use on galvanized metal.

Highlights:

• Size: 12 Oz.
• Color: Lobster Red
• Gloss finish.
• Rust-preventive enamel spray paint.
• For indoor and outdoor use.
• Apply to metal, wood, concrete or masonry.
• Durable and corrosion resistant.
• It provides lasting protection & beauty in a wide variety of colors & finishes.
• It features a comfort tip with a wider finger pad to reduce fatigue caused by continuous spraying.
• In addition, there is an any-angle spray feature that allows you to spray in any direction, even upside-down.
• Apply two or more light coats a few minutes apart.

Painting Conditions:

Use outdoors or in a well ventilated area such as an open garage. Apply when temperature is between 50-90°F (10- 32°C) and humidity is below 65% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200°F (93°C). Do not apply to galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

Application:

Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle Do not strike can. Contact Rust-Oleum. Shake often during use. Hold can 10-16" from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply 2 or more light coats a few minutes apart to avoid runs and sags. Metallic Sprays are not recommended for outdoor use. Do not use near open flame.

Dry & Recoat:

Dry and recoat times are based on 70°F and 50% relative humidity. Allow more time at cooler temperatures. Dries tack-free in 2-4 hours, to handle in 5-9 hours, and is fully dry in 24 hours. Apply a second coat within 1 hour or after 48 hours. A clear coat finish is not recommended.

Clean-Up:

Wipe off tip before storing. Clean-up wet paint with xylene or mineral spirits. Properly discard empty container. Do not burn or place in home trash compactor.

Clogging:

If the valve clogs, twist and pull off spray tip and rinse in a solvent such as mineral spirits. Do not insert any object into can valve opening.

Physical Properties:

• Resin Type: Oil modified alkyd
• Pigment Type: Varies with color
• Fill Weight: 1.40 Max
• Solvents: 12 ounces
• MIR: Xylene, Aliphatic Hydrocarbons
• Recommended Dry Film Thickness (DFT) Per Coat: Acetone, Toluene, Xylene
• Practical Coverage at Recommended DFT (assumes 15% material loss): 10-12 sq. ft./can (0.9-1.09 m²/can)
• Dry Times at 70°F (21°C) and 50% Relative Humidity: Tack-free (2-4 hours), Handle (5-9 hours), Recoat (Before 1 hour or after 48 hours)
• Dry Heat Resistance: 200°F (93°C)
• Shelf Life: 5 years
• Flash Point: -156°F (-104°C)